High pressure valve HPV-1NC
It is Suitable in fixed-quantity dispense of highly viscous liquid agent
It is Suitable in fixed-quantity dispense of highly viscous liquid agent
High pressure valve HPV-1NC
・Leak of liquid materials is prevented by original high withstand pressure design.
・The resolution, maintenance is easy in needle valve-type one.
| Model | HPV-1NC |
|---|
| Drive system | Air operation rate type |
|---|
| The smallest dispensing volume | 13μl |
|---|
| Adaptation liquid materials viscosity | High viscosity use |
|---|
| Adaptation liquid material | Grease |
|---|
| Maximum air pressure | 0.3～0.5MPa(3～5kgf/cm2) |
|---|
| Maximum Fluid feed pressure | 4.5MPa(45kgf/cm2) |
|---|
| Maximum reply number of times | 720 times of /min. |
|---|
setsu
zoku
Mouth
Diameter | Liquid entrance | φ 6 X φ 4 Fluid feed coupling |
|---|
| Liquid discharge opening | Lure lock |
|---|
| Air operation port | M5 coupling |
|---|
| Operating temperature limits | 5～60 degrees Celsius |
|---|
| Weight | 900 g |
|---|
| Wetted part material | SUS, fluoric resin, brass |
|---|
※Dispensing volume of this Specifications, adaptation viscosity, adaptation materials are reference levels.
Needle control valve N 
Fluid drip prevention v 